Restore Performance. Protect Uptime. Validate on Test Stands.
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by any original equipment manufacturer (OEM).
All brand names, trademarks, and part numbers are used solely for identification purposes.
Your independent source for industrial servo drive repair and electronic control repair. We diagnose, rebuild, and test motion electronics from all major brands, offering both expert repairs and servo drive sales (new, reman, exchange).
- Servo drive & amplifier repair, rebuilds, and sales
- Industrial electronic control repair (motion, PLC, HMI)
- Load testing & burn-in on dedicated stands
- Parameter backup/restore & emergency service
All replacement drives include a 1-year warranty. Rebuilt/repairs include a 6-month warranty after full validation.
Non-Affiliated Third-Party Repair of Bosch Rexroth® and Indramat® Servo Drives
Independent Repair of Rexroth® & Indramat® Servo Drives
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Bosch Rexroth AG. We are not a Bosch Rexroth service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Rexroth servo drives and legacy Indramat platforms. We also provide electronic control repair for controllers and offer servo drive sales (exchange/new) to minimize downtime.
- Failure analysis and component-level repair
- Encoder/feedback interface checks & tuning
- Parameter readout, firmware handling, functional run-up
- Exchange units and replacement sourcing
Series we service
- Indramat DDC, DDS
- Indramat DKC (EcoDrive), DKS
- Indramat DMD, DSC
- Indramat HDS
- Indramat KDA, KDS, KDV
- Indramat TBM, TDA, TDM
- Indramat TVD, TVM
- Indramat CLM, BTM, CCD, CDM
- Indramat NAM, NFD, OKC
- Indramat RAC, RECO, SEK
- Indramat MTCNC, VCM
- Rexroth DNC, DLC-100
- Rexroth HMS01 (IndraDrive)
- Rexroth MDSD, MDSD1, MDSD1K
- Rexroth QLC-1, VE102, SPT-2xxB
- Rexroth VT (16xx, 20xx, 30xx, 50xx)
- Rexroth VT-VRPA, VT-VRRA, VT-VSPA
Non-Affiliated Third-Party Repair of Siemens® Servo Drives
Independent Repair of Siemens® SIMODRIVE, SINAMICS & MASTERDRIVES
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Siemens AG. We are not a Siemens service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Siemens servo drives, covering SIMODRIVE, SINAMICS, and MASTERDRIVES. We also handle electronic control repair (SINUMERIK, SIMATIC) and servo drive sales with parameter backup/restore.
- Power stage & control board repair
- I/O and feedback interface validation
- Environmental/burn-in testing
Series we service
- SIMODRIVE 611 (6SN11xx)
- SINAMICS S120
- SINAMICS S110
- SINAMICS G120
- MASTERDRIVES (6SE70, 6SE71)
- SIMOVERT (Legacy)
- SINUMERIK 810/840 Controllers
- SIMATIC Motion Controllers
Non-Affiliated Third-Party Repair of Yaskawa® Servo Drives
Independent Repair of Yaskawa® SERVOPACK & CACR Drives
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Yaskawa Electric Corporation. We are not a Yaskawa service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Yaskawa servo drives including SERVOPACKs and CACR drives. We offer tuning, load validation, and servo drive sales (exchange/new), plus electronic control repair with parameter migration.
- Parameter backup/migration assistance
- Feedback & I/O diagnostics
- Exchange and replacements available
Series we service
- CACR (AC, HR, PR, SE, SR variants)
- CIMR (MTII / MTX / PC…)
- CPCR
- SGDA, SGDB, SGDC, SGDG, SGDH
- JANCD-CPxx (controller/board)
- JUSP-OP (option units)
- DR1 / DR2
- CPHX / RUA…
Non-Affiliated Third-Party Repair of Allen-Bradley® Servo Drives
Independent Repair of Allen-Bradley® Kinetix & Ultra Series
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Rockwell Automation. We are not an Allen-Bradley service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Allen-Bradley servo drives including Kinetix, Ultra, and legacy 13xx series. We also manage electronic control repair (PLC-5, SLC, Panelview) and provide servo drive sales with full parameter capture.
- Power and control board repair
- Parameter capture & restore
- Thermal and functional test cycles
Series we service
- 1391, 1391B, 1392, 1394, 1394C
- 1332, 1333, 1334, 1336, 1336F
- 1386, 1387, 1388, 1388B, 1389
- 160 (160-xx), 22A (PowerFlex)
- 100-B, 1203, 124101, 1326AB
- 1745, 1746 (SLC), 1771 (PLC-5 I/O)
- 1772, 1774, 1777, 1785 (PLC-5 CPU)
- 2706 (Message Display)
- 2711 / 2711E (PanelView)
- 5120, 6160, 6171
- 8000, 8500, 8600
- 845H / 845N / 845T (Encoders)
- PLC-2, SLC150, MDX-5
Non-Affiliated Third-Party Repair of Kollmorgen® Servo Drives
Independent Repair of Kollmorgen® AKD, SERVOSTAR & BDS Series
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Kollmorgen. We are not a Kollmorgen service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Kollmorgen servo drives including AKD, SERVOSTAR, and BDS series. We provide parameter handling, electronic control repair, and servo drive sales (exchange/new) with full load verification.
- Feedback/encoder interface checks
- Control board and power module repair
- Replacement sourcing
Series we service
- BDS3, BDS4, BDS4A, BDS5, BDS5A
- PSR3, PSR4/5A
- SR (SR06/10/10200…)
- PA (PA2800)
- D-series (D20…)
- LE-series (LE03…)
- TRA/2…
Non-Affiliated Third-Party Repair of SEW-Eurodrive® Servo Drives
Independent Repair of SEW-Eurodrive® MOVIDRIVE & MOVITRAC
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by SEW-Eurodrive. We are not a SEW-Eurodrive service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for SEW-Eurodrive servo drives including MOVIDRIVE, MOVITRAC, and MOVIAXIS. We support high-duty applications with electronic control repair, parameter handling, and servo drive sales.
- Component-level repair & refurbishment
- Cooling, power stage & gate drive checks
- Run-up and burn-in on stand
Series we service
- MOVIDRIVE B
- MOVIDRIVE MDX61B
- MOVIAXIS
- MOVI-C
- MOVITRAC B
- MOVITRAC LTE-B
- MOVI-PLC
- Legacy (MOVIFIT, etc.)
Non-Affiliated Third-Party Repair of Parker® SSD Servo Drives
Independent Repair of Parker® Compax3, Aries & SSD Drives
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Parker Hannifin Corporation. We are not a Parker service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Parker SSD servo drives including Compax3, Aries, and legacy SSD/Eurotherm families. Ask about our electronic control repair services and servo drive sales (exchange/replacement) programs.
- Power electronics & control repairs
- Feedback, I/O and comms testing
- Exchange and replacement options
Series we service
- Compax3 (C3)
- Aries (AR)
- ACR9000
- AC10, AC30
- SSD 590+ (DC)
- SSD 690+ (AC)
- SSD 512C, 514C (DC)
- SSD 650 (VFD)
Non-Affiliated Third-Party Repair of Danfoss® Drives
Independent Repair of Danfoss® VLT & VACON Drives
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Danfoss A/S. We are not a Danfoss service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Danfoss drives including VLT, VACON, and legacy Sauer-Danfoss platforms. We also provide electronic control repair and drive sales with parameter backup/restore.
- Control & power stage repair
- I/O & communications checks
- Thermal and run-in testing
Series we service
- VLT, VACON Series
- 155B… / 162B… families
- 5016… / 6010… / 9632… families
- A21201A000 (A-series)
- Sauer-Danfoss 162B- family
Non-Affiliated Third-Party Repair of Moog® Servo Drives
Independent Repair of Moog® Motion Controllers & Servo Drives
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Moog Inc. We are not a Moog service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Moog servo drives and controllers. We service motion controllers, SmartMotors, and legacy axis controllers. Contact us for electronic control repair and servo drive sales for legacy units.
- Encoder/feedback interface tuning
- Component-level refurbishment
- Replacement sourcing for legacy units
Series we service
- 123, 130, 133, 150, 151, 152, 153 families
- 164-xxx family
- 45-844, 8045R2, 82A / 82B families
- D121, D918, E123, E127, E128
- F122, F123, F128
- G122, G361-xxxx
- L143, L180, M2000
- N123, N131, NF122, NF123, NF128
- T150, T157, T161, T164, T200
- X150, Z123…, BRMP1
Non-Affiliated Third-Party Repair of Vickers® Amplifiers & Controllers
Independent Repair of Vickers® EEA-PAM Amplifiers
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Eaton Corporation (Vickers). We are not a Vickers service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Vickers amplifiers and controllers for hydraulic and motion control electronics. We handle electronic control repair for amplifiers (EEA-PAM) and controllers, plus amplifier sales for legacy systems.
- Component-level amplifier repair
- Power supply and logic board diagnostics
- Full functional testing
Series we service
- EEA-AMP, EEA-DSG, EEA-PAM
- EEA-PAM-5xx (511/523/525/533...)
- BRD-4S, BRM4S, BRM-P
- DPSC, DLTA
- EHA-PID, EHA-S1C
- EM-A, EM-D, EM-E, EMP-A
- EMRS-A, EM-SPC, EM-VP
- SMC20, SMC20H, VMC100, VMC-1000
- KDG1, KDG2, KTG1, KTG2
- CF5000, CF5008, AV2400
Non-Affiliated Third-Party Repair of Heldt & Rossi Servo Drives
Independent Repair of Heldt & Rossi 800-Series Amplifiers
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Heldt & Rossi. We are not a Heldt & Rossi service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Heldt & Rossi servo drives, specializing in 800-series amplifiers. We provide component-level diagnostics, electronic control repair, and servo drive sales to support your legacy machinery.
- 800 Series specialists
- Power stage and control logic repair
- Sourcing for obsolete components
Series we service
- 801 Series, 807 Series, 808 Series
- 808E, 808N, DX808N
- SM807DC
Non-Affiliated Third-Party Repair of Emerson® Servo Drives
Independent Repair of Emerson® DX, FX & Epsilon Series
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Emerson Electric Co. We are not an Emerson service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for Emerson servo drives including DX, FX, and Epsilon series drives. We also offer electronic control repair for motion controllers (PCM) and provide drive sales and exchange options.
- DX/FX/LX Series repair
- Epsilon & EN Series repair
- PCM motion controller repair
Series we service
- AX, CFCS
- DX, DXM
- EN (EN-204-…), EPSILON
- FM, FX (FX-208/316/4120/455...)
- IBS, LX, MX (MX1600)
- PCM (PCM-1/3/4/11/14/15)
- PMC (PMC-1/525PMC)
- SP (SP2401)
- T-series (T-21/T-420)
- TA-series (TA-202/420/460)
Non-Affiliated Third-Party Repair of ElectroCraft® Servo Drives
Independent Repair of ElectroCraft® BRU-Series & MAX/PRO Lines
Important: NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by ElectroCraft. We are not an ElectroCraft service center.
All brand names, trademarks, and part numbers are used solely for identification purposes.
We provide independent repair services for ElectroCraft servo drives including the popular BRU-Series (BRU-200, BRU-500) and MAX/PRO lines. We handle electronic control repair and offer drive sales for legacy systems.
- BRU-200 & BRU-500 specialists
- DM, PDM, PSM module repair
- MAX & PRO series repair
Series we service
- BRU-200, BRU-500
- BSA-xx
- DM-10/20/30/50, DDM-150
- LA5400 / LA5600
- MAX-100 / MAX-400 / MAX-430
- MSC-100
- PAC025A
- PDM-10/30
- PRO-400
- PSM-50 / PSM-125
- VAR9000
- SS016-xxxx
Important Legal Notice
Independent Third-Party Repair Facility: NC Servo is an independent repair facility. We are not affiliated with, authorized by, endorsed by, or connected to any manufacturers mentioned on this website including Bosch Rexroth AG, Siemens AG, Yaskawa Electric Corporation, Rockwell Automation (Allen-Bradley), Kollmorgen, SEW-Eurodrive, Parker Hannifin Corporation, Danfoss A/S, Moog Inc., Eaton Corporation (Vickers), Heldt & Rossi, Emerson Electric Co., ElectroCraft, or any other original equipment manufacturer (OEM).
Trademark Notice: All brand names, trademarks, logos, and part numbers mentioned on this website are used for identification and cross-reference purposes only and remain the property of their respective owners. References to OEM names, trademarks, and part numbers are made solely to identify the equipment we service and do not imply any affiliation, authorization, sponsorship, or endorsement by the trademark owners.
Independent Services: Our repair services are performed independently using our own methods, tools, parts, and expertise. We are not an authorized service center for any of the manufacturers listed. All repairs are conducted by our trained technicians based on industry standards and our professional experience.
Warranties: All warranties provided are our own and are issued solely by NC Servo. Our warranties are not backed by, connected to, or endorsed by any OEM. Warranty terms apply only to services performed by NC Servo.
Parts and Components: Replacement parts may be OEM parts, aftermarket parts, or refurbished components depending on availability and customer requirements. We do not represent that all parts used are original manufacturer parts unless specifically stated.
Get Your Free Quote
Fill out the form below and we'll get back to you within 24 hours with a detailed repair quote.