Third-Party Repair of Toshiba TOSVERT Industrial Drives | NC Servo Technology
NC Servo Technology - Westland, Michigan 734-326-6666

Independent Repair Shop. Industrial Toshiba Only.

Third-Party Repair of Toshiba TOSVERT Industrial Drives

Independent third-party repair of Toshiba industrial drive hardware: TOSVERT VF-AS1 series variable frequency drives, Toshiba servo drives, and motion controllers. Industrial Toshiba only, not consumer Toshiba electronics. Backed by a 19,000+ unit in-house inventory we pull aftermarket and donor parts from. NC Servo is not affiliated with Toshiba Corporation. Working on this kind of hardware since 1975.

TOSVERT VFDs VF-AS1 and other TOSVERT variable frequency drives serviced at the component level.
Industrial only Servo drives and motion controllers from the industrial Toshiba line. Not consumer.
One-year warranty Standard on parts and workmanship for Toshiba drive repairs and rebuilt units.

Important Distinction

Industrial Toshiba is a different thing from consumer Toshiba

Toshiba is one of the larger Japanese conglomerates. The same name shows up on industrial drives, consumer electronics, medical equipment, semiconductors, and a lot of other products. NC Servo only works on the industrial drive and motion control side. The split below is what we do and do not.

Yes: we service Industrial Toshiba
  • TOSVERT VF-AS1 variable frequency drives
  • TOSVERT VF-S15 and other industrial VFD lines
  • Toshiba industrial servo drives
  • Toshiba motion controllers
  • Industrial control boards and amplifiers
No: out of scope Consumer and other Toshiba
  • TVs, laptops, and consumer electronics
  • Home appliances, microwaves, AC units
  • Medical imaging and diagnostic systems
  • Semiconductor and memory products
  • Power generation and rail systems

Service Coverage

What NC Servo does with a Toshiba industrial drive

Each Toshiba industrial drive is opened, inspected, and rebuilt at the component level. Failed parts come from inventory or off donor units, then the drive runs under load on the electronics bench before it ships back.

TOSVERT VFDs

VF-AS1 and other TOSVERT variable frequency drives. IGBT module replacement, DC-bus capacitor service, gate-driver work, and PWM control verification.

Servo drives

Toshiba industrial servo drives. Power-stage diagnostics, control-board work, feedback-channel verification, and bench testing under load.

Motion controllers

Toshiba motion controllers and industrial control boards. I/O modules, communication interfaces, and signal-conditioning electronics.

Toshiba Coverage

Toshiba models through the door

We are a small repair shop, not a Toshiba distributor. The families below are simply the ones that come through often enough to be familiar. If your part number is not on this list, send it anyway. We work on what we can.

TOSVERT VF-AS1 Variable frequency drives across multiple frame sizes. Common bench items: IGBT module replacement and DC-bus capacitor service.
Toshiba servo drives Industrial servo drives with closed-loop feedback. Common bench items: power-stage rebuild and feedback-channel verification.
Motion controllers and legacy Toshiba motion controllers, older industrial drive lines, and control boards on long-running automation systems.

Common Faults

What usually shows up on a Toshiba repair

A description of the symptom or the keypad fault code helps the diagnosis, but a model number is often enough. The categories below cover the kinds of trouble that come in across Toshiba TOSVERT and servo drives.

DC-bus and supply Failed bus capacitors after long service, blown input rectifier diodes, and failed gate-driver supply rails on TOSVERT VFD frames.
IGBT power stage Blown IGBT modules, failed gate-driver circuits, and protection-trip faults on TOSVERT VF-AS1 and Toshiba servo-drive power stages.
Control and signal path Control-board failures, failed voltage regulators, signal-conditioning drift, and bad I/O on motion controllers and servo drives.
Communication and feedback Fieldbus interface faults, feedback-channel signal drift on servo drives, and keypad / display interface failures on long-running TOSVERT VFDs.

Repair Path

From model number to ship-back

Most Toshiba jobs follow the same four steps. Lead time varies because some repairs need parts pulled off a donor unit, so we only commit to timing once a tech has the drive on the bench.

Get in touch

Phone or email with the Toshiba TOSVERT or servo-drive model number, frame size, kW or HP rating, and a quick note on the symptom or fault code.

Bench review

Once the drive arrives, a tech opens it, inspects the power stage and control boards, and runs it under load on the electronics bench to confirm what failed.

Cost & approval

We call back with the cost and a rough turnaround. Nothing happens without your sign-off.

Repair, test, ship

Failed components are replaced from inventory or off donors, the drive is verified under load, and the unit ships back.

Electronics test bench for Toshiba drive component-level repair at NC Servo Technology

Bench Verification

Each Toshiba drive gets verified before ship

Repaired Toshiba drives are tested under load on the electronics bench. Power-stage performance, DC-bus behavior, I/O response, and keypad / display behavior are all verified against documented procedures.

  • DC-bus rebuild verified at rated voltage on the supply rail.
  • IGBT module switching and gate-driver behavior checked under representative load.
  • Keypad / display response and parameter readback verified on TOSVERT units.
  • Feedback channel verified end-to-end on servo drives and motion controllers.

Inventory & Parts Pool

A 19,000+ unit pool with Toshiba hardware in it

NC Servo's in-house inventory holds over 19,000 valves and drives accumulated since 1975, including TOSVERT and Toshiba servo-drive donors. That pool is where the shop pulls aftermarket parts and donor components for older Toshiba drives that the OEM no longer stocks.

  • Aftermarket and donor parts for TOSVERT VFDs, servo drives, and motion controllers.
  • If we have a rebuilt match for your model, trade in your old drive for a discount on the rebuilt.
  • No match on the shelf? We can suggest a comparable Toshiba or cross-brand option, or repair yours.
  • Rebuilt drives carry the same 1-year warranty as a fresh repair.
Stocked shelves of drives and valves at NC Servo Technology
Component-level repair workspace for Toshiba TOSVERT drives and motion controllers

Repair Scope

Where the line is on a Toshiba repair

NC Servo works on the drive hardware itself: power stage, DC bus, control boards, I/O modules, and feedback channels. Drive parameter setup, motion-program development, and getting the drive back on the machine stay with your team or your installer.

  • Component-level board repair: power stage, control boards, signal-conditioning electronics.
  • TOSVERT VFD power-stage and DC-bus rebuild on long-running units.
  • Drive parameter configuration and motion programming remain on your side.
  • Putting the drive back on the machine follows your normal startup process.

Toshiba TOSVERT drive faulted out?

Give us a call with the TOSVERT or servo-drive model number, the frame size, and the fault code on the keypad if it still reads. We will check the shelf, and if we have a rebuilt match you can swap your old one for a discount. If we do not, we can suggest a comparable drive or repair the one you have.

Give Us a Call

FAQ

Common questions about Toshiba repair

A few things customers ask before sending a unit in. Anything not covered, give us a call at 734-326-6666.

Is NC Servo affiliated with Toshiba?

No. NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Toshiba Corporation or any related entities. All Toshiba and TOSVERT trademarks are the property of their respective owners.

Do you repair consumer Toshiba products?

No. We service industrial Toshiba products only: TOSVERT VFDs, servo drives, and motion controllers used in manufacturing and automation. We do not repair consumer electronics, home appliances, TVs, laptops, or anything in the Toshiba consumer line.

Which Toshiba drives do you cover?

TOSVERT VF-AS1 series variable frequency drives, Toshiba industrial servo drives, and Toshiba motion controllers. Send a model number and we will tell you what we have.

Can NC Servo recover parameters from a failed Toshiba drive?

Most failures are hardware, and the unit comes back working with its program intact. Corrupted programs are rare; if one is already corrupted before the unit reaches us, that's the one thing we can't recover.

How long does a Toshiba drive repair take?

It varies. NC Servo is a small independent shop, and lead time depends on the drive, what is wrong with it, and whether parts have to come off a donor unit. Give us a call once the drive ships in, and we can give a current estimate after a tech has looked at it.

What if the Toshiba drive is beyond economic repair?

If the drive is not fixable, we will let you know and help source a replacement: a rebuilt match if we have one on the shelf, or a comparable Toshiba or cross-brand alternative.

What is the warranty on a Toshiba drive repair?

One year on parts and workmanship for repairs and rebuilt units. Standard exclusions apply for line-side faults, improper installation, and out-of-spec operation. Verifying line voltage, supply protection, and load matching before powering up a repaired drive is recommended.

NC Servo Technology is an independent, third-party repair facility and is not affiliated with, authorized by, or endorsed by Toshiba Corporation or any related entities. Toshiba, TOSVERT, VF-AS1, and all other brand names, model numbers, and trademarks referenced on this page are the property of their respective owners and are used solely to identify equipment serviced by NC Servo Technology. Final installation, system commissioning, drive parameter configuration, and operational compliance remain the responsibility of the customer, OEM, or qualified integrator.

Get Your Free Quote

Fill out the form below and we'll get back to you within 24 hours with a detailed repair quote.