Valve Overview

Whether the issue is age, wear, or contamination, the PEGASUS 180LX can often be restored. NC Servo applies the same structured approach to every rebuild.

Independent Repair Facility

Unlike OEM shops, we use our own inventory to handle most rebuilds. That cuts down on lead time and gets your unit back faster.

One-year warranty on all PEGASUS 180LX valve repairs

Frequently Asked Questions

Even if the tag is worn off, we can often match the unit based on shape, size, and internal configuration.

Not required, but removing excess oil or loose debris before packing helps keep things clean in transit.

Part of our intake includes troubleshooting to determine the failure point. We report findings before proceeding.

Most repairs are completed within 1 to 3 weeks, depending on workload and parts availability.

Helpful but not required. If you can photograph the label, connectors, and overall unit, it gives our team a head start.

Disassembly and Rebuild Procedure

We disassemble every valve, inspect it inside and out, and clean all moving parts. Components that fail inspection are swapped out before the valve is rebuilt and tested.

  • Leak and Pressure Testing: The reassembled unit is leak-tested and pressure-tested to verify it meets published specs.
  • Final Performance Verification: After reassembly, each valve is bench-tested against published performance specifications.
  • Seal and Gasket Replacement: Worn seals and gaskets are replaced with new components during every rebuild.
  • In-House Parts Sourcing: Many repairs use components sourced from our inventory of 17,000+ units.

Hydraulic Testing Process

NC Servo operates over a dozen dedicated flow test stands, including setups for proportional and servo valves. Every valve goes through performance and leak testing using industry-standard fluids including MIL-5606 and Skydrol. Our functional testing verifies consistent performance.

Turnaround and Shipping

As a dedicated source for PEGASUS 180LX services, NC Servo targets quick resolution with typical lead times of 1 to 3 weeks. Benefit from our direct access to our technicians to keep your systems running smoothly.

Maintenance Tips

  • Check valve alignment carefully to prevent undue stress on internal components.
  • Schedule preventive maintenance intervals based on duty cycle, not just calendar time.
  • Keep hydraulic fluid clean and at proper levels for consistent valve operation.

Get a Free Evaluation for Your PEGASUS 180LX

Request pricing, availability, and turnaround for your PEGASUS 180LX. NC Servo provides experienced repair with a 1-year warranty. Contact us to start your repair.

Request a Quote View All PEGASUS Products Shop PEGASUS Inventory

NC Servo is an independent third-party repair facility. We are not affiliated with, endorsed by, sponsored by, or authorized by PEGASUS or any original equipment manufacturer (OEM), nor do we claim to be a PEGASUS service center. All brand names, trademarks, model numbers, and part numbers referenced on this page are the property of their respective owners and are used solely for identification and compatibility purposes.